• Speeds and Feeds… part one I started writing this with the naïve thought this could be done quickly and in one page. That isn’t happening unless I speak of one...
  • Testing with Nicks stuff because i ain’t using my own here. y’all, ignore me for a bit as this press box develops.
  • HALO Table I was approached and commissioned to create a table from genuine mahogany that measures at least 30″ and no more than 36″ in diameter and...
  • CNC Acrylic+Graphite Acrylic is well documented for most CNC users. Graphite is a little different, but not much different than other fiberous synthetic material- and the graphite...

General Category

No New Posts Intro's and Announcements

A good place to introduce yourself and find out about Phantom CNC Systems news and Announcements

23 Posts
13 Topics

Last post by paul
in Re: IPv6's are hard to c...
on June 12, 2024, 11:16:48 AM

No New Posts General Discussion

Feel free to talk about anything and everything in this board.

28 Posts
15 Topics

Last post by SBL Designs
in Re: Help with bits
on December 20, 2023, 06:17:25 AM

No New Posts Website Issue's, Suggestions, and Requests

Post it up if you've got an issue, suggestion, or request- and it'll get some attention.

4 Posts
2 Topics

Last post by Hammer
in Re: Can we get a pinned ...
on April 06, 2023, 08:35:33 PM

Owner's Only

No New Posts The Guild

Find help with production; give help with production. Together, we can do big jobs where as individuals we are limited. You 'bought' into Phantom- and a community, and this is one of the perks.

2 Posts
2 Topics

Last post by drew
in we are all makers here
on January 03, 2023, 02:18:33 PM


No New Posts Vetrics

Here is a list of CURRENT post processors for Vetrics (VCarve; Aspire) for each machine

21 Posts
9 Topics

Last post by paul
in Re: Increasingly rougher...
on June 12, 2024, 11:19:00 AM

No New Posts AutoDesk FUSION

These are Post Processors for FUSION for each of the machines. Remember, FUSION is NOT "officially" supported due to their subscription based nature and alterations to how they process codes. What is posted here has been 'reported' by users to work, but your mileage may vary. Test these thoroughly yourselves.

17 Posts
5 Topics

Last post by drew
in Re: Atomic Not Ramping
on November 21, 2023, 09:44:29 PM

S-Series Phantom Machines

No New Posts Help and Support

Troubleshooting and resolve- need help? this is where you'll find it.

188 Posts
44 Topics

Last post by Fontao
in Wireless pendat
on June 01, 2024, 06:11:19 PM

No New Posts Strategies and Tactics- Vectrics

Ask for help, post advise, make a statement about toolpaths and functions while using Vectrics (Aspire; VCarve; ect).

7 Posts
2 Topics

Last post by drew
in Re: clean and not so cle...
on January 16, 2023, 07:27:16 PM

No New Posts Strategies and Tactics- Fusion

Is Fusion your design engine of choice? You'll find information and have a place to share in this board.

11 Posts
5 Topics

Last post by drew
in Re: HD100 Controller and...
on January 30, 2023, 07:32:49 PM

T-Series Phantom Machines

No New Posts T-Series Set Up and Getting Started

Just what it means- this is where you'll find information on getting started, and which includes "Do's and Don'ts"

20 Posts
4 Topics

Last post by mb289
in Re: Fusion 360 Post Proc...
on September 22, 2023, 07:02:25 AM

No New Posts Help and Support

Here you will find and assist from the pro's- post it up and help will arrive.

4 Posts
3 Topics

Last post by drew
in Re: Tramming the spindle
on April 30, 2023, 01:50:28 PM

Golf Balls with the Directional, found in our weapons lockers<~more~>
By drewactual
MAGA Defiance Apron …because, Trump ain’t havin’ none of that,<~more~>
By drewactual
Part of the MAGA Defiance line, the directinal which is<~more~>
By drewactual
MAGA Defiance Trump ain’t having none of that, y’all…  <~more~>
By drewactual
Trump MAGA Defiance Trump ain’t havin’ none of that, y’all. <~more~>
By drewactual
MAGA Definace Decal/Sticker A kiss-cut provides you with the ultimate<~more~>
By drewactual
Trump 2024 MAGA Defiance Mug   Mugs are a staple<~more~>
By drewactual
MAGA Defiance  Trump won’t be having none of that.  Limited<~more~>
By drewactual

  • No New Posts
  • Redirect Board

Phantom CNC Support/Community - Info Center

Forum Stats Forum Stats

346 Posts in 115 Topics by 111 Members. Latest Member: RobertSoymn
Latest Post: "Re: Increasingly rougher..." ( June 12, 2024, 11:19:00 AM )
View the most recent posts on the forum.

Users Online Users Online

13 Guests, 0 Users

Most Online Today: 33. Most Online Ever: 286 (December 20, 2021, 04:42:17 PM)