Author Topic: SCV 44 post procesor for vectric rapid rate  (Read 18246 times)

Offline donl65

  • Newbie
  • *
  • Posts: 1
    • View Profile
SCV 44 post procesor for vectric rapid rate
« on: September 25, 2023, 01:37:01 PM »
is there an update, i can only get a 22 inch per minute rapid rate, this surely cant be right for this machine, im sure desk top machine are pushing the same

Offline drew

  • Administrator
  • Full Member
  • *****
  • Posts: 180
  • If'n it ain't broke yet, just give me a minute.
    • View Profile
Re: SCV 44 post procesor for vectric rapid rate
« Reply #1 on: October 06, 2023, 08:46:10 AM »
is there an update, i can only get a 22 inch per minute rapid rate, this surely cant be right for this machine, im sure desk top machine are pushing the same

that has nothing to do with the PP- that is in the machine's setup.  I wish I was more familiar with the HD100 to help you out, but I'm not... the rapid rate is ALL machine, though, as is arc maximum and minimum, initial safety height (but this CAN be changed per cut file) and maximum Z plunge...