Author Topic: Phantom 4x4 post processor  (Read 17610 times)

Phantom 4x4 post processor
« on: November 02, 2022, 01:08:25 PM »
Attached is a working post processor that I have been testing for Drew. See the post processor tab for installation instructions.

Offline Jared

Re: Phantom 4x4 post processor
« Reply #1 on: December 15, 2022, 03:48:49 PM »
Good Evening, 
Is there limitation on the hard drive size, file format?
Thanks,
Jared

Offline Fontao

Re: Phantom 4x4 post processor
« Reply #2 on: January 03, 2023, 08:56:20 AM »
This post processor can be used in fusion360?

Offline drew

  • Administrator
  • Full Member
  • *****
  • Posts: 184
  • Total likes: 22
  • If'n it ain't broke yet, just give me a minute.
    • View Profile
Re: Phantom 4x4 post processor
« Reply #3 on: January 03, 2023, 08:57:46 AM »
give me a few minutes and I\'ll hang the post processor for the 4x4-and-fusion360 here.... one I know is a good one.

Offline drew

  • Administrator
  • Full Member
  • *****
  • Posts: 184
  • Total likes: 22
  • If'n it ain't broke yet, just give me a minute.
    • View Profile
Re: Phantom 4x4 post processor
« Reply #4 on: January 03, 2023, 09:05:37 AM »
here she is-

don\\\'t forget to describe your work envelope (machine bed size) in fusion.  the post processor works in either mm or standard, and is toggled within fusion.

note to be clear:  THIS IS A FUSION360 Post Processor FOR HD100 controlled machines... NOT DSP and NOT Vetrics.  please don\'t try to use it with either of those two... you may turn your machine into a printer.... or washing machine... or studio sound mixing board... or a damn transformer... :)
« Last Edit: January 03, 2023, 09:09:09 AM by drew »

Offline Aardvark

Re: Phantom 4x4 post processor
« Reply #5 on: March 09, 2023, 10:45:27 AM »
Thanks drew,
just to clarify, the post-processor 'Phantom_44.pp' in your first post is for SCV44 and Vectrics, correct?

Offline drew

  • Administrator
  • Full Member
  • *****
  • Posts: 184
  • Total likes: 22
  • If'n it ain't broke yet, just give me a minute.
    • View Profile
Re: Phantom 4x4 post processor
« Reply #6 on: March 09, 2023, 01:41:00 PM »
https://www.phantom-cnc.com/index.php?topic=127.0


the one found at that link is the latest and tested by Dillan at Sandmanwooddesign .... i don't have a hd100 machine to test it on myself, but I'm told it's good.