Phantom 4x4 post processor

[Sandmanwooddesign]

Attached is a working post processor that I have been testing for Drew. See the post processor tab for installation instructions.

[Jared]

Good Evening, 
Is there limitation on the hard drive size, file format?
Thanks,
Jared

[Fontao]

This post processor can be used in fusion360?

[drew]

give me a few minutes and I\'ll hang the post processor for the 4x4-and-fusion360 here.... one I know is a good one.

[drew]

here she is-

don\\\'t forget to describe your work envelope (machine bed size) in fusion.  the post processor works in either mm or standard, and is toggled within fusion.

note to be clear:  THIS IS A FUSION360 Post Processor FOR HD100 controlled machines... NOT DSP and NOT Vetrics.  please don\'t try to use it with either of those two... you may turn your machine into a printer.... or washing machine... or studio sound mixing board... or a damn transformer...

[Aardvark]

Thanks drew,
just to clarify, the post-processor 'Phantom_44.pp' in your first post is for SCV44 and Vectrics, correct?

[drew]

https://www.phantom-cnc.com/index.php?topic=127.0


the one found at that link is the latest and tested by Dillan at Sandmanwooddesign .... i don't have a hd100 machine to test it on myself, but I'm told it's good.